Frequently Asked Questions
This tire size would not be equal to a 35-inch tire. The 295/70R18 tire size means the tire’s tread width is 295 millimeters, the sidewall height is 70% of the tread width, and the rim diameter is 18 inches. A 295/70R18 tire would have an overall diameter of about 33.6 inches. Hence, it is not equal to a 35-inch tire size.
This tire size is used to designate a tire that has a tread width of 295 millimeters, or around 11.6 inches, a sidewall that is 70 percent of the tread width, and an 18-inch rim diameter. It is frequently seen on rugged trucks, SUVs, and all-terrain vehicles formulated to give superior off-road performance while also allowing the transport of a higher load.
The lift to fit the 295/70R18 tires can depend on many factors, including the differential make or model. However, for the general statement, almost all vehicles need at least 2 to 3 inches of additional lift to make sure the larger tire is not rubbing.
The tire size has the following metric measurements: tread width: 295mm; sidewall heights: 70% of the tread width 295 x 0.70 = 206.5mm; rim diameter: 457.2mm, 18 inches. You can use our fitment guide to get the perfect fitment for your tire.
This tire size may fit some models of Jeep Wrangler. However, modifications or lift kits may be required. For most Jeep Wrangler models, they need a lift of 2 to 3 inches, although it may also depend on the wheel offset. Generally, these tires should perfectly fit the Jeep Wrangler.
